SR 130

Sarroof SR-130 is a highly breathable, 3 layers, water-tightness membrane; the top and bottom layers are made of non-woven polypropylene fabric which protects the middle polyolefin film. All layers contain stabilization additives which extend its UV resistance to 4 months.

Advantages

  • Resistant to UV rays
  • Low weight and easy to use
  • High vapor-permeability
  • Water-tightness

Packaging and Storage

PROPERTIES METOD UNIT VALUES TOLERANCES MIN. TOLERANCES MAX.
Length TS EN 1842-2

m

50 m 0% 4%
Width TS EN 1842-2 mm 1500 mm -0,50% 1,50%
Mass per unit area EN 1849-2

gr/m2

130 -10 10
Reaction to fire EN 13501, EN 11925-2 - E - -
Resistance to water penetration EN 1928-Metod A - W1 - -
Water vapor transmission properties (Sd) EN 12572, EN 1931 m 0,038 -0,015 0,01
Tensile properties: maximum tensile force (MD/CD) EN 12311-1, EN 13859-1 B N/50 mm 568/304 -40/-30 55/45
Tensile properties: Elongation (MD/CD) EN 12311-1 ve EN 13859-1 B % 138/111 -20/-25 25/30
Resistance to tearing (nail shank) (MD/CD) EN 12310-1 ve EN 13859-1 A N

153/202

-40/-50 75/75
Dimensional stability EN 1107-2 % <1 - -
Flexibility at low temperature EN 1109, EN 495-5 °C (-30) - -
Resistance to water penetration after artificial ageing EN 1296, EN 1928-  Metod A - W1 - -
Max. tensile force after artificial ageing (MD/CD) EN 1296, EN 12311-1 N/50 mm 528/263 -40/-30 55/45
Elongation after artificial ageing (MD/CD) EN 1296, EN 12311-1 % 82/76 -20/-25 25/30
Resistance to tearing after artificial ageing (MD/CD) EN 1296, EN 12310-1 N 126/176 -40/-50 75/75